Electrical Repair & Maintenance · Canada-Wide
Electrical Repair & Maintenance Services
Wiring repairs, panel upgrades and scheduled inspections from an on-site team that already knows your building’s electrical system, delivered under the same standard as Learn about our Building Repair & Maintenance Services. Not a call center. Not a different electrician every visit.
- Licensed electricians
- 10+ years in operation
- 24/7 emergency response
Under 2 hours
Average emergency response time on-site
ISO 9001
EcoLogo Certified
WSIB Insured
WHMIS Certified
GREENGUARD
IPC Member
The basics
What is commercial electrical maintenance?
The difference between calling an electrician when something breaks and having one who already knows your panel.
Commercial electrical maintenance is the regular inspection, testing and servicing of a building’s electrical system, done on a schedule instead of only after something fails. It covers panel and breaker checks, tightening connections that loosen over time, testing emergency lighting and life safety equipment covered under Fire Detection & Protection Services, and catching the kind of wear that doesn’t show up until it causes an outage. Most electrical failures don’t happen without warning. A loose connection or an overloaded circuit tends to develop for months before it trips a breaker or takes down a piece of equipment. Reactive repairs, calling someone in after a failure, cost more and shut down more of your operation than catching the same issue during a scheduled visit.
Reactive electrical repairs
- You call only after something fails
- A new electrician each time, no history of your panel
- Downtime while the problem gets diagnosed from scratch
- No inspection trail for code compliance
Electrical maintenance with Cleaning 365
- Scheduled inspections catch issues before failure
- The same team learns your panel, wiring and load history
- Faster repairs since the system is already documented
- Inspection reports ready whenever compliance is checked
Building-Specific Programs
Built around your building's electrical system, not a generic checklist
Every commercial building carries its own electrical history: a panel that’s been added onto twice, a wing that draws more load than it did five years ago, lighting that’s half LED and half original ballast, and building systems that extend to our Elevator & Escalator Maintenance Services. Before we start, our electricians map your panels, circuits and load, and flag anything already running hot or close to capacity. That map becomes your maintenance schedule, coordinated the same way across Explore Facility Management Services. The same technician who inspected your panel in January is the one who shows up in April, so nothing gets re-diagnosed from zero every visit. Small issues, a breaker that resets itself, a flickering fixture, a warm panel cover, get caught on a scheduled visit instead of becoming the reason your building loses power on a Tuesday afternoon.
Our services
Fast, licensed repair work for anything from a tripped breaker to a full circuit failure, plus the preventive visits that catch problems before they get there.
Two service types, one team, built around your building’s electrical system.
Electrical Maintenance & Repairs · Technical
Repairs & troubleshooting
Planned upkeep and fast repairs for the systems that keep your building running.
- Wiring repairs
- Breaker & panel repairs
- Circuit troubleshooting
- Lighting & ballast repairs
- Emergency repairs
- Preventive maintenance
Inspections & Compliance · Safety
Inspections & panel upgrades
Scheduled checks and documented upgrades that keep your electrical system safe and your building inspection-ready.
- Panel inspections
- Panel upgrades
- Thermal scanning
- Load assessments
- Life safety & emergency lighting testing
- Code compliance reporting
Building Types
The buildings we service
Licensed electrical work for the property types that can’t afford unplanned downtime.
Office Towers & Corporate Buildings
Mixed-Use Properties
Multi-Tenant Commercial Buildings
Multi-Unit Residential & Condo Buildings
Retail Plazas & Strip Malls
Medical & Professional Buildings
Warehouse & Industrial Buildings
Government & Institutional Buildings
Load and compliance needs shift a lot by building type. A healthcare facility runs on tighter inspection intervals than a retail plaza, and a warehouse with heavy equipment draws differently than an office tower, the kind of variation also covered on See our Office Building Facility Management page and through our Parking Management Services solutions. We build the maintenance schedule around what your building actually runs, not a generic annual visit.
How it works
How our electrical maintenance process works
1
Electrical walkthrough
We inspect your panels, circuits and load in person and flag anything already running close to capacity, at no cost.
2
Custom maintenance plan
You get an inspection schedule and repair plan built around your building’s electrical system, with one fixed monthly quote.
3
Team placement
We assign dedicated staff to your building and set their schedule around your operating hours.
4
Inspections & repairs
Scheduled checks and repair work run on schedule, with thermal scans and load checks logged every visit.
5
Reporting & updates
You get a documented report after every visit, so compliance checks and inspections never catch you unprepared.
10+
Years of licensed electrical service
Under 2 hours
Average emergency response time
24/7
Emergency coverage, every day of the year
100%
Licensed & insured electricians
Why Cleaning 365
Every technician is licensed and carries the coverage commercial clients require.
Reliability, documentation and a team that already knows your panel.
Licensed & insured electricians
The same team works your building each visit, so nothing gets re-explained.
Panel history, not guesswork
Your system gets mapped once and referenced on every visit after.
24/7 emergency support
A tripped breaker or power fault gets a call answered, not a voicemail.
Compliance built in
Inspection reports and documentation are part of the plan, not a separate request.
Consistent technicians
The same electricians return to your building, so nothing gets re-explained.
One point of contact
A single facility lead answers for the results, from a small repair to a panel upgrade.
PRICING
Electrical maintenance pricing
Every building is priced on its own panel, load and inspection needs, not a flat rate card.
Building size
Square footage & number of panels
System age & load
Panel condition and current draw
Inspection frequency
Annual, semi-annual or quarterly
Building type
Compliance & specialist requirements
Get a customized quote in 30 minutes
Tell us about your building's electrical system and we'll send transparent pricing with no hidden fees.
What clients say
Trusted to Keep the Power On
“We had a panel that kept tripping every few weeks and three different electricians couldn’t figure out why. Cleaning 365 mapped our whole system, found a load issue nobody else caught, and it hasn’t happened since.”
Facility Manager
Retail plaza, Mississauga
“Our power went out on a Saturday night and their team was on-site in under an hour. They already had our panel layout on file from a previous inspection, so the fix took minutes instead of hours.”
Operations Director
Corporate office building, Toronto
FAQs
Electrical Repair & Maintenance, Answered
Most commercial buildings benefit from an annual electrical inspection. Higher-load environments, like healthcare facilities, manufacturing sites or large warehouses, typically need semi-annual or quarterly checks. We assess your building's panel age, load and building type before recommending a schedule.
A standard visit includes panel and breaker inspection, checking for loose or overheating connections, testing emergency lighting and life safety equipment, and a documented report of anything flagged. Larger or older systems may also get thermal scanning to catch heat buildup before it causes a failure.
Yes. Power faults, tripped panels and outages don't wait for a weekday, and our emergency response team doesn't either. Support runs 24/7, with an average on-site response time under two hours.
Yes. If your building's load has grown beyond what your current panel supports, we handle the assessment, upgrade and any permit coordination required, and can advise on rebates where they apply. Most upgrades are scheduled to avoid shutting your building down for more than a few hours.
Yes. Every technician is licensed and every visit is covered under our insurance, which is the standard most commercial and multi-tenant buildings require before allowing electrical work on-site.
Put a licensed electrical team on your building today
Scheduled maintenance, fast repairs and a team that knows your panel. Book a free walkthrough and get a fixed monthly quote, usually within one business day.